Kwamfuta Saws

Rukunin samfuran

Fitattun Kayayyakin

JY-465 Atomatik Edge Banding Machine

JY-468 Atomatik Edge Banding Machine...

JY-468J Atomatik Edge Banding Machine...

JY-468JK Atomatik Edge Banding Machi...

JY-468K Na'ura mai sarrafa kansa ta atomatik tare da datsa sau biyu & chamfering

JY-468K Atomatik Edge Banding Machine...

JY-468KG Na'ura mai ɗaukar nauyi ta atomatik tare da datsa sau biyu & tukunyar manna ta ƙasa sau biyu

JY-468KG Atomatik Edge Banding Machi...

JY-568JKGC Atomatik Edge Banding Mac...

JY-568JKGSSC(PUR) Madaidaicin Layin Ƙarƙashin Ƙarƙashin Ƙarfafa Na'ura

JY-568JKGSSC(PUR) Madaidaiciya ta atomatik ...

JY-668JKGC Atomatik Edge Banding Mac...

JY-668JKGSC(PUR) Na'ura mai sarrafa kansa ta atomatik Tare da Pre-milling + datsa biyu + tukunyar manne biyu

JY-668JKGSC(PUR) Bandi ta atomatik...

01 02 03 04 05

KS938 Babban Gudun Kayan Kwamfuta Na Gani

KS938 Babban Gudun Kayan Kwamfuta Na Gani

Range na aikace-aikace: Electronic da kwamfuta yankan saws da kyau kwarai yi da kuma m applicability, kuma za a iya amfani da ko'ina a MDF, barbashi jirgin, MDF, gypsum jirgin, wucin gadi dutse, plexiglass, babban core jirgin, haske jagora jirgin, aluminum jirgin, aluminum- allon filastik, allon kewayawa, Daidaitaccen yankan katako na katako da sauran allunan.

Samfura KS938
Tsawon Sake mm 3800
Nisa Sake mm 3800

Tuntube mu

Ƙayyadaddun bayanai Bayani Aikace-aikace

Ƙayyadaddun bayanai

KS938

Samfura	KS938	Small saw shaft diamita	50mm ku
Tsawon Sake	mm 3800	Ƙananan saurin gani	6200r/min
Nisa Sake	mm 3800	Gudun Ciyarwa	0-100 M/min
Girman Tsira	100-120 mm	Gudun sarewa	0-100 M/min
Matsayin Hanya	Na atomatik	Komawa gudun	0-120 M/min
Matsayi Daidaito	± 0.02mm	Matsin iska	0.6-0.8 MPA
Daidaiton Zaure	± 0.15mm	Centrifugal fan	3 kw
Babban Saw Motor Power	15 kw	Jimlar iko	23.5kw
Babban abin gani ruwa diamita na waje	400-450 mm	Kaurin saman aiki	Babban abin gani 25mm; Karamin saw 16mm
Main saw shaft diamita	75mm ku	Haƙuri tsakanin 1M na rakiyar tara	0.02mm
Babban saurin gani	4100r/min	Hanyar latsawa	Silinda matsa
Saw karusar jan wutar lantarki	2.0kw	Daidaitaccen launi	Kusa da fari
Manipulator Servo Motor	2.0kw	Nauyin inji	6800kg
Karamin gani ikon mota	1.5kw	Girman lodawa	Babban inji: 520014502100 mm
Small saw ruwa diamita na waje	200mm	Girman lodawa	Na'urorin haɗi: 36008001900 mm

Bayani

KS938

A'a.	Tsarin	takamaiman umarni	Aiki
1	Tsarin jikin injin	Worktop: 28mm karfe farantin da aka yi amfani da tebur saman, 18mm ga karin tebur, da square tube ne welded a daya yanki. Jiki: Reinforced square tube welded, annealed a sifili zazzabi.	Tabbatar da daidaiton tsinkayar injin ɗin na dogon lokaci, sannan kuma tabbatar da cewa jikin injin ba zai taɓa lalacewa ba kuma ya kasance mai dorewa.
2	Tsarin lantarki	Cutar huhu	Ƙarin matsa lamba, alluna da yawa ba su da sauƙin zamewa.
		Motar: Babban injin sawn yana da 15kw, ƙaramin injin ɗin ya kai 1.5kw, injin ɗin injin ɗin ya kai 2.0KW.
		Sassan lantarki: yi amfani da Yonghong PLC mai sarrafa shirye-shirye da mai tuntuɓar Schneider don tsawaita rayuwar sabis na injin.	Bargarin sassan lantarki suna tsawaita rayuwar na'urar.
		Na'urar iyakan abin hawa: ta amfani da sarrafa sakawa ta servo	Yana maye gurbin madaidaicin iyaka na nau'in sanda na baya, yana guje wa yanayin cewa akwai ƙura kuma yana da sauƙi a makale.
		Matsa lamba: Ana kiyaye matsa lamba na wannan kayan aiki a 0.6-0.8kgf / cm2 yayin amfani.	Babban matsa lamba yana tabbatar da yanke daidaito.
		Farashin INVT	Gudu da sauri cikin kwanciyar hankali.
		19 inch mai kula da kwamfuta
		Voltage: Wannan na'urar tana aiki akan 380 volts 3 phase 50 Hz.
3	Tsarin tsaro	Tashar tashar ciyarwa tana amfani da na'urar dakatar da gaggawar lever.	Tabbatar da amincin ma'aikaci.x
4	Tsarin tsarin ƙasa	Tashar tashar ciyarwa tana amfani da tebirin bead mai yawo mai huhu da babban fanka mai tsayin 3kw.	Sauƙi don matsar da allunan.
5	Tsarin buffer	Ana amfani da buffer mai daidaitawa mai daidaitawa.	Yana maye gurbin buffer na bazara a baya, yana guje wa girgizar injin gabaɗaya da sauƙi na lalacewar bazara.
6	Tsarin watsawa	Na'urar dogo jagora: Yi amfani da φ20mm, φ25mm madauwari masu jagora. Saw karusa ɗaga raba jagorar dogo biyu.	Bayan babban-mita magani, taurin ya kai 62º, mai dorewa kuma mai jurewa, ba mai sauƙin lalacewa ba.
		Rack da pinion traction drive	Ƙarin ƙarfi da kwanciyar hankali watsawa, mafi girman daidaito
		Babban bel ɗin gani yana amfani da bel na lokaci.	Babban bel ɗin lokacin gani yana da dorewa sau biyu kamar bel ɗin V.
7	Saw shaft tsarin	ACUCE main saw yana amfani da φ400φ754.4mm alloy saw
8	Tsarin hana ƙura	Labulen da ke hana ƙura zai iya sa yanayin aiki ya zama mafi tsabta kuma daidaitaccen sawing ya fi girma.	Akwai ƙura kaɗan kawai a cikin duka taron yankan panel, wanda ke rage cutar da mutane, yanayin samarwa ya fi tsafta, kuma ƙarar ta yi ƙasa.
9	Tsarin sarrafawa	Ana iya jujjuya majalisar ministoci 180º ta amfani da cikakken maɓallan allon taɓawa.	Ya dace da aiki a kusurwoyi daban-daban, mai sauƙin amfani.
10	Na'urar ciyarwa ta atomatik	Na'urar da ke gudana ta manipulator tana amfani da madaidaicin rails.	Rage haƙuri haƙuri na inji, sawing daidaici.

Aikace-aikace

KS938

KS938 Babban Gudun Kayan Aikin Komputa Mai Gani (4)qqg